Cub Crafters CC11-100 Maintenance Manual page 327

14 Tailwheel Tire Pressure (applicable to the optional
tailwheel only):
- Verify pressure.
15 Lubricate per Chapter 6.2
Return To Service
1 Install engine cowling.
2 Install fuselage and empennage access panels.
3 Install wing access panels.
4 Verify oil level is 6 quarts.
5 Perform engine run-up in accordance with
operational / functional check:
- After completing, perform a walk around to
detect fluid leaks or other discrepancies.
6 Verify all Cub Crafters' Service Letters, Bulletins,
and Instructions are complied with.
7 Verify the aircraft's documentation is in order:
- Airworthiness Certificate
- Registration
- Pilot's Operating Handbook and Aircraft Flight
Manual
- Weight and Balance
- Equipment List
Operational/Functional Inspection Report
1 Flight Controls:
- Check controls operate in the correct direction
- Ensure movement through full range of travel without
binding and there is no excessive friction.
2 Flaps:
- Lower flaps to the first, second and third notches
- Ensure the notches hold, both upward and downward.
3 Elevator Trim Controls:
- Ensure it operates through full range of travel without
binding.
4 Engine Controls:
- Ensure movement through full range of travel without
binding or cable wear.
5 Altimeter:
- Must indicate within 50 feet of field elevation when set to
correct barometric pressure.
6 Vertical Speed Indicator (VSI):
- Must indicate zero.
Manual number SC10000AMM
Date: 01/31/2011
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
X
X
Interval
Ref.
100 Special
X
X
X
X
Initials
Initials
Notes
6.A
Page: A9