Cub Crafters CC11-100 Maintenance Manual page 326

Wing Group
10 Flap Attachments and Brackets:
- Visual inspection for tightness and damage.
11 Flap Crossbar, Control Rod, Spring Pins, and
Blocks:
- Visual inspection
12 Lubricate per Chapter 6.2
Landing Gear Group
1 Fabric and Finish:
- Visual inspection for cracks and deterioration.
2 Jack Airplane.
3 Gear, Cabane, and Shock Strut Bolts and Nuts:
- Visual inspection for safety.
4 Shock Absorber and Shock Cords:
- Visual inspection for broken bands, threads,
and weakness.
5 Tires:
- Visual inspection for cuts, uneven or
excessive wear and slippage.
6 Wheels:
- Remove, clean, check, and repack bearings.
7 Main Wheel Tire Pressure:
- Check pressure.
8 Brake Lining and Disks:
- Visual inspection for excessive wear.
9 Brake Lines:
- Visual inspection for chafing and security.
10 Tailwheel Attachments:
- Visual inspection for tightness and safety.
11 Tailwheel Fork:
- Visual inspection for looseness on bracket.
12 Tailwheel tire:
- Visual inspection for cuts and uneven or
excessive wear.
13 Tailwheel:
- Remove, clean, and visually inspect for
damage and corrosion
- Functionally check tail wheel swivel lock
- Repack bearings (if applicable).
6.A
Page: A8
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
Interval
Ref.
100 Special
X
X
X
Interval
Ref.
100 Special
X
X
X
X
X
X
X
X
X
X
X
X
X
Manual number SC10000AMM
Initials
Initials
Date: 01/31/2011