Cub Crafters CC11-100 Maintenance Manual page 325

Fuselage and Empennage Group
4 Rudder, Elevator and Stabilizer Trim Cables,
Turnbuckles, Guides, and Pulleys:
- Inspect for tension, safety, wear, damage,
corrosion, and operation.
5 Stabilizer Yoke and Screw:
- Visual inspection for end play, security, and
excessive wear.
6 Rudder, Stabilizer, and Elevator Structures:
- Visual inspection for damage.
7 Rudder Hinge Pins and Bushings:
- Visual inspection for excess wear, and
corrosion.
8 Elevator Hinge Pins and Bushings:
- Visual inspection for excess wear, and
corrosion.
9 Stabilizer Brace Wires:
- Visual inspection for corrosion, tightness, and
safety.
10 Lubricate per Chapter 6.2
Wing Group
1 Fabric and Finish:
- Visual inspection for cracks and deterioration.
2 Aileron, Flap, and Wing Structure:
- Visual inspection for damage.
3 Fuel Tanks, Caps, and Lines:
- Visual inspection for damage, leaks and
deterioration.
4 Wing Attachment Bolts:
- Visual inspection for security.
5 Lift and Jury Struts:
- Visual inspection for security.
6 Lift Strut Forks:
- Visual inspection for damage and security.
7 Aileron and Flap Cables, Turnbuckles, Guides,
and Pulleys:
- Visual inspection for safety, damage,
corrosion, and operation.
8 Ailerons Attachments and Brackets:
- Visual inspection for tightness and damage.
9 Aileron Hinge Pins and Blocks:
- Visual inspection for excess wear and
corrosion.
Manual number SC10000AMM
Date: 01/31/2011
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
Interval
Ref.
100 Special
X
X
X
X
X
X
X
Interval
Ref.
100 Special
X
X
X
X
X
X
X
X
X
Initials
Initials
6.A
Page: A7