Cub Crafters CC11-100 Maintenance Manual page 309


Smooth any edges, which may be sticking up, using a small hot iron.

Smooth tape and doubler edges using dry 320 grit sandpaper to remove surface
dust bumps.

Blow and tack off the covering to be sure it is as dust free as possible.

Spray or brush the third coat of Poly-Spray and let dry for approximately 15
minutes.

Spray or brush the fourth coat of Poly-Spray and let dry completely before
sanding.
(l) Paint to match original paint
Manual number SC10000AMM
Date: 04/18/2013
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
6.4
Page: 5