Indefinite Storage - Cub Crafters CC11-100 Maintenance Manual

(2) INDEFINITE STORAGE

Do not set the parking brake as brake seizing can result.
(a) Park and moor the airplane.
(b) Apply engine preservation. Refer to the latest edition of manufacturer's service
letter.
(c) Drain the fuel tanks. (Refer to Chapter 6.3.12)
(d) Clean the brake assemblies. The wheels should be turned three to four
revolutions per 30 days to prevent corrosion. Touch up all spots where paint has
been chipped from the wheels. Wipe the tires with dry cloth, and treat with tire
protector spray. Turn the wheels. Mark the tire position and date with chalk.
Check the air pressure periodically and inflate the tires as necessary. (Refer to
Chapter 6.2.3)
It is advisable to use unserviceable tires for prolonged storage.
(e) Remove the battery (Refer to Chapter 6.3.14) and the ELT batteries (Refer to
Chapter 5.4.14) and store in accordance with standard practices (Refer to
Chapter 6.3.14). Clean the battery compartment and the battery cable terminals
to neutralize any battery acid that may be present.
(f) Lubricate according to lubrication schedule. (Refer to Chapter 6.2.3)
(g) Clean the propeller to remove dirt, oil, and bug accumulation. Coat the blades
with preservative oil and wrap with moisture proof material. A good practice is to
position the propeller in an angled or horizontal position.
(h) Clean and cover the instruments and the panel. Take any additional precautions
according to the manufacturer.
(i) Clean and install protective covers on the seats
(j) Remove all loose equipment and store.
(k) Clean and install covers over windshield and windows.
Manual number SC10000AMM
Date: 08/02/2010
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
CAUTION
NOTE
6.3.24
Page: 5