General - Cub Crafters CC11-100 Maintenance Manual

1. GENERAL

The location of any point on the aircraft is identified in a three axis grid as follows (Reference
Figure 5.2.1):

FS - Fuselage Station is a horizontal reference designation starting in front of the nose of
the airplane at a point 60 inches ahead of the wing leading edge.

WL - Water Line is a vertical reference designation measured parallel to the ground from
a point 38.53 inches below the center of the bolts that attach the landing gear to the
fuselage.

BL - Buttock Line is a horizontal reference designation starting at the airplane centerline.
When the aircraft is viewed from above, the letters "L" and "R" indicates whether the
point is to the left or the right of the centerline.

WS - Wing Station is measured outboard from the center of the respective wing
attachment bolt to the wing tip. The letters "L" and "R" designate left or right wing
respectively.
5.2
Page: 2
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
Manual number SC10000AMM
Date: 10/01/2010