Landing And Taxi Lights; Incandescent Lighting System - Cub Crafters CC11-100 Maintenance Manual

2

LANDING AND TAXI LIGHTS

The landing/taxi light consists of one PAR 36 type lamp mounted in the left wing leading
edge. The light is covered with a Plexiglas lens the same shape of the leading edge. A
breaker switch on the instrument panel turns on the light.
(1) REMOVAL
(a) Remove the lens
(b) Remove 4 screws and the lamp.
(c) Disconnect wiring.
(2) INSTALLATION
(a) Attach wiring.
(b) Reposition front mounting plate and secure with 4 screws.
(c) Reattach the lens being very careful not to crack the Plexiglas.
3

INCANDESCENT LIGHTING SYSTEM

(1)
TROUBLESHOOTING
PROBLEM
Bulb does not light up
(2)
NAVIGATION LIGHTS
(1) GENERAL
The colors of the navigation lights conform to standard aeronautical practice. The left
wing navigation light is red, the right wing navigation light is green and the tail
navigation light is white. A breaker switch on the instrument panel turns on all three
lights.
Manual number SC10000AMM
Date: 08/02/2010
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
PROBABLE CAUSE
Bulb burnt out
Circuit breaker tripped
Loose wiring
REMEDY
Replace bulb
Reset circuit breaker
Check wiring to bulb
6.3.19
Page: 3