Removal; Inspection - Cub Crafters CC11-100 Maintenance Manual

(1) REMOVAL

PRIOR TO REMOVING THE MAGNETOS, MAKE SURE THE FUEL MIXTURE IS
IN IDLE CUTOFF POSITION THE AND THE MAGNETOS ARE TURNED OFF
(a) Remove spark plug cable terminals from the plugs.
(b) Detach spark plug cable brackets from the case studs.
(c) Cable outlet plates may be detached by unscrewing the screws which attach
each plate to the magneto.
(d) Pull the plate and grommet carefully from its position.
(e) Remove two nuts retaining each magneto, and withdraw it to the rear.

(2) INSPECTION

Inspect the magnetos in accordance with the Teledyne-Continental Operator's
manual.
6.3.18
Page: 4
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
WARNING
Manual number SC10000AMM
Date: 04/27/2009