Inspection; Installation - Cub Crafters CC11-100 Maintenance Manual

(2) INSPECTION

(a) Inspect the cowl for loose rivets, wear points and cracking.

(3) INSTALLATION

(4)
(a) Carefully position the lower cowl in place.
(b) Carefully position the lower cowl in place; secure the cowl to the fuselage with
screws.
(c) Carefully position the upper cowl in place; secure it to the lower cowl and to the
fuselage with screws.
(d) Make sure the baffle seal is properly formed against the cowling, baffle seal
should face forward.
(e) Double check to make sure all the hardware is tight.
(f) Reinstall the induction tubing, ensure hose clamps are tight.
(g) Verify that there is clearance between the cowl and prop spinner.
Manual number SC10000AMM
Date: 04/27/2009
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
Figure 6.3.14.2 Engine Cowl Installation
6.3.14
Page: 3