Refer to Figure 6.3.11.9
The throttle plates (4) are kept from moving by seven AN525 screws (3) that are
bolted through the left hand composite side panel (2).
(4) MOTOR MOUNT THROTTLE CABLE ATTACHMENT
4
Figure 6.3.11.10
Refer to Figure 6.3.11.10
The throttle cable (1) is held in place to the mixture bracket (4) with the jam nut. The
mixture cable (2) is held in place with the cable clamp (3), bolt, washer and nut.
6.3.11
Page: 12
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
1
1 – Throttle Cable
3 – Cable Clamp
Attachment of Throttle to Mixture Bracket
3
2
2 – Mixture Cable
4 – Mixture Bracket
Manual number SC10000AMM
Date: 10/01/2010