Lever Interconnect Linkage - Cub Crafters CC11-100 Maintenance Manual

(a) Each lever is installed onto a bolt that is mounted to the throttle lever plate (2) as
shown.
(b) Each control has spacers (8) which are secured with a AN525 screw (5),
washers (4), a bushing (9), and nylon lock nuts (6).
(c) The connecting rod (3) is secured to the throttle levers with a AN525 screw (5),
washers (4), castle nut, and cotter pin (7).
(d) The heavy duty throttle cable is secured to the clevis with an AN315 nut.

(2) LEVER INTERCONNECT LINKAGE

1 – Throttle Knob
3 – Throttle Cable
6.3.11
Page: 10
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
Figure 6.3.11.8 Throttle Interconnect Linkage
(View from the cockpit, looking outboard)
2 – Connecting Rod
4 – Throttle Lever
Manual number SC10000AMM
Date: 10/01/2010