(5) THROTTLE CABLE TO CARBURETOR ARM ATTACHMENT
1 – AN3 Bolt
4 – Bushings
7 – Pin Vice Grip
Figure 6.3.11.6
Refer to Figure 6.3.11.6
(a) The throttle cable is secured to the carburetor arm with a bolt (1), through-
bushings (4), a washer (6), a nut (2), and a cotter pin (5).
(b) The throttle travel can be adjusted by screwing the bearing rod end. Be sure that
the bearing rod end jam nut is retightened after making any adjustment.
Manual number SC10000AMM
Date: 10/01/2010
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
2 – Castle Nut
5 – Cotter Pin
8 – Bearing Rod End
Attachment of Throttle Cable to Carburetor Arm
3 – Nut
6 – Washer
6.3.11
Page: 7