Oil Cooler; Removal - Cub Crafters CC11-100 Maintenance Manual

2.3.

OIL COOLER

(1) REMOVAL

(a) Disconnect the hose fittings from the elbows that go into the oil cooler. Use a
backup wrench on the elbow fittings to prevent damage to the oil cooler.
(b) Loosen the hose clamp and remove the air duct.
(c) Remove the through-bolt that hold the brace and carefully remove the oil cooler.
(d) Disconnect the hoses from the oil cooler elbows.
(e) Remove the elbows from the oil cooler.
6.3.10
Page: 8
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
Figure 6.3.10.3 Oil Cooler Installation
Manual number SC10000AMM
Date: 08/02/2010