Inspection; Installation - Cub Crafters CC11-100 Maintenance Manual

Do not damage the temperature probe wire while separating the screen housing from
(d) Drain the oil from the housing and remove the screen.

(2) INSPECTION

(a) Inspect the screen (2) and inside the housing (3) for foreign particles.
If examination of the pressure screen indicates abnormal metal content, additional
service may be required to determine the source and possible need for corrective
(b) Remove the old gasket (1) and make sure the housing and case surfaces are
clean.

(3) INSTALLATION

(a) Assemble the screen in the housing and assemble the gasket and the housing
on mounting pad.
(b) Ensure that the gasket is properly oriented.
(c) Using new lock washers, secure the housing with bolts and torque in accordance
with Teledyne-Continental's operator's manual and overhaul manual.
(d) Remove the rag and clean all excess oil from the engine, firewall and muffler.
Manual number SC10000AMM
Date: 08/02/2010
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
CAUTION
the accessory case.
CAUTION
maintenance
6.3.10
Page: 7