(3) REASSEMBLY OF TAIL WHEEL
(a) Insert the wheel hubs (8) with the gasket (9) in between into the tire and tube
assembly. Make certain the gasket (9) is properly aligned with tube valve and
hub bolt holes.
(b) Insert 4 bolts and engage with 4 nuts. Torque to 80-100 in-lbs.
(c) Inflate the tire to 38 psi.
(d) Pack the bearings with grease (MIL-G-81322E).
(e) Insert a bearing (4), inner spacer (3), grease retainer (2) and spacer (1) into the
each wheel hub.
(f) To install on the airplane see Section 5.4.1.6.4.(6).(j).
6.3.8
Page: 8
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
Manual number SC10000AMM
Date: 08/02/2010