Installation - Cub Crafters CC11-100 Maintenance Manual

A – Cotter Pin
D – Flap Hinge
G – Washer
Refer to 6.3.6.7 and 6.3.6.8
(a) Remove the cotter pin (3) and nut (4) holding the bolt (6) on the flap cone (2) and
flap hinge (1); keep the bolt (6) in place temporarily.
(b) Remove the cotter pin (A) and nut (B) holding the bolt (H) on the flap hinge (D)
and aileron hinge (F)
(c) Remove the outboard bolts first and carefully remove the flap by sliding it
outboard.

(2) INSTALLATION

1- Inboard Hinge
Manual number SC10000AMM
Date: 04/27/2009
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
B – Castle Nut
E – Washer
H – Bolt
Figure 6.3.6.8 Flap Hinge (continued)
Figure 6.3.6.9 Flap Installation
C – Washer
F – Aileron Hinge
2 - Outboard Hinge
6.3.6
Page: 9