Cub Crafters CC11-100 Maintenance Manual page 171

Leave no more than 3 threads visible at each end of the turnbuckle barrels.
(e) Safety each turnbuckle barrel with 2 wire lock clips making sure the clip ends
are locked in the hole (Figure 6.3.6.6). Alternatively use the single wrap method
with .032 stainless safety wire.
Tight cables make stick action stiff while loose cables result in stick action that is too free and
uncertain. Properly adjusted cables should not slap or wobble when the stick is moved back
Manual number SC10000AMM
Date: 04/27/2009
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
CAUTION
Figure 6.3.6.6 Safety of Turnbuckles
NOTE
and forth in rapid succession.
6.3.6
Page: 7