PROBLEM
Stall warning does comes on
at a speed less than 6 mph
above the stall
Stall warning does not work
3.
AILERONS
(1) REMOVAL
Refer to Figure 6.3.6.1
(a) Disconnect both aileron control cables from the upper and lower aileron horns.
(b) Remove the bolts while firmly holding the aileron.
(c) Carefully remove the aileron from the wing panel.
Manual number SC10000AMM
Date: 04/27/2009
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
PROBABLE CAUSE
Stall warning vane not
calibrated properly
Problem in the electric circuit,
switches or horn
Figure 6.3.6.1
Aileron Installation
REMEDY
Calibrate stall warning vane
Inspect and replace or repair
damaged components
6.3.6
Page: 3