(7) ELEVATOR INSTALLATION
(a) Identify which are the left and right elevators. The sewn seams are on the
bottom trailing edge of each.
(b) Install each elevator onto the matching hinges on the stabilizers using clevis pins,
wire pull brackets, with a washer at each end of every pin, and then secure each
with a cotter pin. (Figure 6.3.5.8)
6.3.5
Page: 12
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
Figure 6.3.5.8 Clevis Pin Installation on Elevator
Manual number SC10000AMM
Date: 04/18/2013