General - Cub Crafters CC11-100 Maintenance Manual

6.3.1

GENERAL

This section describes the removal method and replacement of components for line
maintenance, repairs, and alterations. For maintenance and repair of primary structures, see
Section 5.4.
This section also lists the components that Cub Crafters recommends be replaced at specified
intervals. Whenever this is carried out, ensure that the following information is properly recorded
in the airplane maintenance log:

Date of removal, installation, or overhaul of the component.

Time on the component since last overhaul (if appropriate).
 Aircraft's flight hours.
Replacement Times
(1)
ITEM
1 Engine
2 Propeller
3 B & C
Alternator
4 Starter
5 Exhaust
System
6 Induction Air
Box
7 Flexible Fuel
Lines
8 Flexible Oil
System
Lines
Manual number SC10000AMM
Date: 04/18/2013
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
INTERVAL REPLACE OVERHAUL
2000 Hours
At engine
overhaul
At engine
overhaul
1000 Hours
2000 hours/ X
engine
overhaul,
whichever
comes first
12 years/ X
engine
overhaul,
whichever
comes first
12 years or X
engine
overhaul,
whichever
comes first
REF. IN
THIS
MANUAL
X
maintenance manual
6.3.16
maintenance Manual
X
X
X
NOTES
Refer to the latest
revision of the
manufacturer's
See manufacturer's
6.3.1
Page: 1