Rear Seat Stowage - Cub Crafters CC11-100 Maintenance Manual

2.

REAR SEAT STOWAGE

Disconnect the two cinched nylon straps holding the seat cross bar in place. Unscrew and push
the screw in to allow the tab to rotate and slide pin out of seat base connector. See Figure 4.
Tab in Locked Position
Remove cross bar from fuselage slots. Slide the seat straps and nylon straps off of the cross
bar. Place and secure cross bar in aft storage compartment. Remove cushion from seat. See
Figure 5.
5.4.15
Page: 4
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
Screw
Figure 4 - Cross Bar Strap Attachment
Pin
Tab Rotated and
in Open Position
Manual number SC10000AMM
Date: 01/31/2011