General - Cub Crafters CC11-100 Maintenance Manual

1.

GENERAL

The front seat is made from composite with a foam cushion and covered with either canvas or
leather material. It is attached to the seat base at the front with screws on both sides. There
are two quick-release T-Handle pins, one on each side, at the rear of the seat to adjust the seat
position. See Figure 1 and 2.
Position Adjustment Holes
for T-Handle Insertion
5.4.15
Page: 2
CC11-100 MAINTENANCE MANUAL
T-HANDLES MUST BE SECURED IN PLACE PRIOR TO TAKE OFF.
Figure 1 - Front Seat Attachment
CUB CRAFTERS, INC.
WARNING:
Figure 2 - Front Seat
Quick Release
T-Handle (Both Sides)
Front Attachment
to Seat Base
Manual number SC10000AMM
Date: 01/31/2011