Front And Back Views; Program Buttons; Soft Reset - Algo 8180 User Manual

Front and Back Views

Program Buttons

The Program buttons on the back of the 8180 allow for local adjustment of alert tones and
alert volume. The buttons are intentionally hidden from view after installation.
IP Addr (Reset) button plays the IP Address of the device and acts as a soft reset. The
Ring button plays the current ring tone and allows volume adjustments using the Vol+
and Vol- buttons. Similarly, the Page button plays an audio file at the current page volume
and allows volume adjustments using the Vol+ and Vol- buttons.

Soft Reset

A soft reset will restore all device settings back to the original factory default conditions.
To perform a soft reset, disconnect and connect the network cable, ensuring that there is
power to the device. Once the LED starts to flash, hold down the IP Addr (Reset) button
until the LED light starts to flicker at a faster rate, then release. When the speaker plays a
tone, the reset is complete
Document 90-00095A
01/24/2019
Page 9
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8180 SIP Audio Alerter (G2) FW 1.7
(604) 454-3792
support@algosolutions.com