System Tab - System Log - Algo 8180 User Manual

Restore from Backup Zip File
Restores the device settings (configuration) and all the files in File Manager: certificates,
licenses, and tones from a backup zip file
Restore All Settings and Files to Defaults
Resets the device settings (configuration) and all the files in File Manager: certificates,
licenses, and tones to factory default values.
Reboot the Device
Reboots the device.
Method
Specify whether the firmware files will be downloaded from the local computer or a remote
URL.
Firmware Image
Point to the firmware image provided by Algo.
MD5 Checksum
Point to the checksum file provided by Algo.
How To Upgrade 8180 SIP Audio Alerter (G2) Firmware
1. From the top menu, click on System, then Maintenance.
2. In the Upgrade section, click on Choose File and select the 8180 speaker firmware
file to upload. Note that both the FW firmware and MD5 checksum files must be
loaded.
3. Click Upgrade
4. After the upgrade is complete, confirm that the firmware version has changed (refer
to top right of Control Panel).
System Tab – System Log
System log files are automatically created and assist with troubleshooting in the event the
8180 SIP Audio Alerter (G2) does not behave as expected.
Document 90-00095A
01/24/2019
Page 57
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8180 SIP Audio Alerter (G2) FW 1.7
(604) 454-3792
support@algosolutions.com