Algo 8180 User Manual page 48

Generic (for all Algo 8180G2 Speakers)
Specific (for a specific MAC address)
Both protocol and path is supported for Option 66, allowing for
path to be used.
MD5 Checksum
In addition to the .conf file, an .md5 checksum file must also be uploaded to the
Provisioning server. This checksum file is used to verify that the .conf file is transferred
correctly without error.
A tool such as can be found at the website address below may be used to generate this
file: http://www.fourmilab.ch/md5
The application doesn't need an installation. To use the tool, simply unzip and run the
application (md5) from a command prompt. The proper .md5 file will be generated in the
same directory.
If using the above tool, be sure to use the "-l" parameter to generate lower case letters.
Generating a generic configuration file
1. Connect 8180 to the network
2. Access the 8180 Web Interface Control Panel
3. Configure the 8180 with desired options
4. Click on the System tab and then Maintenance.
5. Click "Download" to download the current configuration file
6. Save the file settings.txt
7. Rename file settings.txt to algop8180g2.conf
8. File algop8180g2.conf can now be uploaded onto the Provisioning server
If using a generic configuration file, extensions and credentials have to be entered
manually once the 8180 SIP Audio Alerter (G2) has automatically downloaded the
configuration file.
Generating a specific configuration file
1. Follow steps 1 to 6 as listed in the section "Generating a generic configuration file".
2. Rename file settings.txt to algom[MAC address].conf (e.g.
algom0022EE020009.conf)
3. File algom[MAC address].conf can now be uploaded on the Provisioning server.
The specific configuration file will only be downloaded by the 8180 with the MAC address
specified in the configuration file name. Since all the necessary settings can be included in
this file, the 8180 will be ready to work immediately after the configuration file is
Document 90-00095A
01/24/2019
Page 48
algop8180g2.conf
algom[MAC].conf
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8180 SIP Audio Alerter (G2) FW 1.7
http://myserver.com/config-
(604) 454-3792
support@algosolutions.com