Algo 8180 User Manual page 36

Extension to Dial
SIP account required in Page Extension fields in order to make a call. Can be configured if
'Make SIP Voice Call' or 'Make SIP Call with Tone' actions are enabled under 'Call Button
Settings'.
Interval Between Tones
Specify the time delay (seconds) between tones. Can be configured if Play Tone' or 'Make
SIP Call with Tone' actions are enabled under 'Call Button Settings'.
Maximum Tone Duration
Select the maximum tone duration. The tone will be terminated once the maximum time is
reached. Can be configured if 'Play Tone' or 'Make SIP Call with Tone' actions are
enabled.
Call Mode
This setting is available when the 'Make SIP Call with Tone' action is enabled and 'Relay
Input Mode' is set to one of the Relay options. If the 'Regular Two-Way Call' setting is
chosen, a relay closure will prompt an intercom-like call via the speaker and its
microphone to a pre-configured extension. When the "Silent Microphone Monitoring" is
enabled, the relay will prompt only the audio from the 8180's microphone to be heard at
the pre-configured extension, while the speaker remains silent. This setting is ideal in
settings where silent emergency calls to a pre-configured extension may be needed with a
single press of a button.
Allow 2 nd Button Press
If enabled, 2 nd button press will either simply End Call or End and Restart Call. Therefore,
if an input is triggered for the second time on terminals 5 & 6 (since the first input trigger
enables one of the four actions listed above) the SIP call will either simply be terminated
or terminated and immediately called again.
Outbound Ring Limit
Typically set to ensure that a call will not reach voicemail. This feature, under 'Outbound
SIP Call Settings', can be used to set a limit on how long the speaker will ring before
timing out.
Ring back Tone
If enabled, under 'Outbound SIP Call Settings', a ringback tone will play over the speaker
during an outbound SIP call, while waiting for the far-end party to answer.
Maximum Call Duration
Select the maximum call length. The call will be terminated once the maximum time is
reached. In the event that a call inadvertently reaches voicemail or gets accidentally left
on hold, this setting ensures that the 8180 returns on-hook.
Document 90-00095A
01/24/2019
Page 36
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8180 SIP Audio Alerter (G2) FW 1.7
(604) 454-3792
support@algosolutions.com