Algo 8180 User Manual page 34

While the 8180 can be configured to play the WAV file only once, it can also be enabled to
play it continuously with just one touch on the 1202 Call Button. The action can then be
stopped via the smaller oval cancel button located below the main call button on the 1202
Call Button.
1204 Volume Button
The 1204 Volume Control Switch is a simple 2 terminal potentiometer that
will allow attenuation below the max volume level (configured under 'Basic
Settings > Features')
Algo's 1204 can be used for variable volume control. The maximum volume should still be
set in the Basic Settings > Features tab as usual, and then the Volume Control Switch will
allow attenuation below this level. Enabling Priority Multicast Override allows priority
multicast to override the volume set by the Volume Control Switch. Enabling 'Mute On
Lowest Setting' allows audio to be completely muted when volume control switch is turned
all the way down.
Action – Play Tone
When the 8180 input is triggered on terminals 5 & 6 ('Relay Terminal Function' must also
be configured to 'Input'), a tone or a pre-recorded WAV file will play over the local
speaker, or multicast if enabled. This function can be used to call support/assistance in
service or retail environments, notify about an emergency at a specific location in medical
or educational facilities, or sound an alarm during an intrusion.
Action When Input Triggered:

o Tone/Pre-recorded Announcement
o Tone Duration
Action – Make SIP Voice Call
When the 8180 input is triggered on terminals 5 & 6, a voice path will open for an
intercom-like call via the 8180 to a pre-configured phone extension. This option can be
used when a call needs to be made from a public place where a phone would not be
practical to use.
Action When Input Triggered:

o Extension to Dial
o Call Mode
o Allow 2
Outbound SIP Call Settings:

Document 90-00095A
01/24/2019
Page 34
nd
Button Press
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8180 SIP Audio Alerter (G2) FW 1.7
(604) 454-3792
support@algosolutions.com