Algo 8180 User Manual page 31

the target group in a Polycom paging environment.
The Polycom phone used as page audio source for the 8180 SIP Audio Alerter (G2)(s),
must be configured to use either the G.711 or G.722 audio codec. The Polycom phone(s)
must also be configured with the "Compatibility" setting ("ptt.compatibilityMode") disabled
in order for this codec setting to be applied.
If using a Polycom phone as the Multicast master, a tone may be set for any of the 25
Polycom Groups configured on the Algo device. If an Algo device is used as a Multicast
master, a tone does not have to be set as the Algo master will provide its own tone.
Polycom Group Tones can be set in Advanced Settings > Advanced Multicast tab.
Slave Zones
Select one or more multicast zones for the 8180 SIP Audio Alerter (G2) to monitor. Note
that multicast zone priority is based on the zone definition list order (top to bottom).
Document 90-00095A
01/24/2019
Page 31
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8180 SIP Audio Alerter (G2) FW 1.7
(604) 454-3792
support@algosolutions.com