Algo 8180 User Manual page 29

Zone Selection Tone
Only visible when 'Zone Selection Mode' is set to 'DTMF Selectable Zone'. The tone
played over the phone to prompt the user to select a zone to multicast to.
Master Single Zone
The zone that multicast stream will be sent to. If 'DTMF Selectable Zone' is chosen above,
this setting will not apply to Paging, since the zone now must be dynamically selected per
call via DTMF. However, the specified 'Master Single Zone' setting is still used for any
multicast events triggered by the Ring, analog input, or the relay input.
Speaker Playback Zones
Allows Master device to play audio for selected zones only. This is useful if using DTMF
Selectable Zone mode (or More Page Extensions per zone) and wishing to make the
Master unit a member of only certain zones.
Document 90-00095A
01/24/2019
Page 29
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8180 SIP Audio Alerter (G2) FW 1.7
(604) 454-3792
support@algosolutions.com