Polycomtm Group Paging; Tls For Sip Signaling And Provisioning - Algo 8180 User Manual

When multicasting music, ensure that Automatic Gain Control (AGC) is 'Disabled' in Basic
Settings > Features tab on all the slave devices. Meanwhile, on the Multicast master
device, select 'G.722' for the 'Master Output Codec' setting in Advanced Settings >
Advanced Multicast tab.
Polycom TM Group Paging
The 8180 SIP Audio Alerter (G2) has been designed to support Polycom Group Paging.
The 8180 can be added to a Polycom Group Page so that voice paging is heard over
Polycom telephone speakers and overhead paging simultaneously.
The 8180 SIP Audio Alerter (G2) may be accessed remotely via SIP and
may generate a multicast page within the LAN sending voice page to both
Algo paging speakers and Polycom telephones. Audio delay may be added
to the 8180 to synchronize with voice page over the Polycom telephone
speakers

TLS for SIP Signaling and Provisioning

Algo devices that support firmware 1.6.4 or later support Transport Layer Security (TLS).
This feature adds security by ensuring that Algo products can trust the hosted SIP server.
This is useful for when third-party devices or attackers may try to intercept, replicate, or
alter Algo products, and try to connect to the server. TLS protocol will ensure that third
parties cannot read/modify any actual data. Previously security was less of a concern
because phone systems were on isolated networks, but hosted services are becoming
Document 90-00095A
01/24/2019
Page 16
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8180 SIP Audio Alerter (G2) FW 1.7
(604) 454-3792
support@algosolutions.com