Programming And Configuration - Algo 8180 User Manual

Programming and Configuration

After connecting the 8180 to a network PoE, the blue indicator light will turn on during
initialization. The 8180 will then attempt to obtain an IP address from the DHCP server. If
there is no DHCP server or the attempt was unsuccessful, the 8180 will default to the
static IP address 192.168.1.111.
Note: If you don't have a PoE switch, you'll need a PoE injector that installs
between the 8180 and network switch. The PoE injector will supply 48 Vdc to the
8180. Most PoE injectors are capable of providing more power than the 8180
requires (12.95 W). Ensure that the PoE injector is fully compliant to the IEEE
802.3af standard.
After a successful boot up the blue LED will turn off and you will hear a tone, and the
speaker will have obtained an IP address.
Press the 'IP Addr (Reset) Button' (next to the Ring Button) momentarily to hear the IP
address over the speaker and press it again to stop playing the IP address over the
speaker.
The IP address may also be discovered by downloading the Algo locator tool to find Algo
devices on your network:
Enter the IP address (e.g. 192.168.1.111) into a browser such as Google Chrome, Firefox, or
Internet Explorer (other than IE9). The web interface should be visible and the default password
will be algo in lower case letters.
Document 90-00095A
01/24/2019
Page 12
www.algosolutions.com/locator
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8180 SIP Audio Alerter (G2) FW 1.7
(604) 454-3792
support@algosolutions.com