Wall Mounting; Input/Outputs - Algo 8180 User Manual

Wall Mounting

Mount the wall bracket securely and snap the 8180 into the bracket by engaging the top
and then pushing the bottom firmly into place. To remove the 8180 from the bracket, press
firmly on the tab of the bottom catch, then lift the cover

Input/Outputs

Relay
The dry contact relay can be configured as an input or output relay. When the relay is
configured as an 'Output', it can be enabled for ring/paging to activate a visual alerter,
mute background music, or enable a slave amplifier. When the relay is configured as an
'Input', it can be prompted by any normally open, normally closed switch to play a tone,
make a SIP voice call, make a SIP call with tone, or stream mic audio.
Auxiliary Speaker
For connection to the optional Algo horn speaker (e.g. for outdoor/wet locations) or to
ceiling speakers wired in a series-parallel configuration to maintain minimum 8 Ω. The
presence of an external speaker(s) will automatically disable the internal speaker to
preserve power.
Audio
High impedance output for driving 600 Ω load up to 0 dBm. Internal speaker may be active
simultaneously, but levels cannot be adjusted separately.
Document 90-00095A
01/24/2019
Page 11
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8180 SIP Audio Alerter (G2) FW 1.7
(604) 454-3792
support@algosolutions.com