Table of Contents
Advertisement
SpeCIFICatIonS
Electrical Requirements
Power Cord Type
Motor No Load Speed
Blade Diameter
Arbor Size and Type
Maximum Cutting Depth
Lubricating Oil
UnpaCKInG
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
List of contents
description
Worm Drive Saw
Carbide Tipped Blade
13mm Arbor Wrench
InStrUCtIonS For
pUttInG Into USe
read the entIre Important
SaFetY InFormatIon
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
SKU 66660
120 V~ / 60 Hz / 15 A
Double Insulated
Polarized
4500 RPM
7-¼" Diameter
5/8" Diamond Type
Left Hand Thread
13mm Bolt Head
2-1/2" at 90°
1-3/4" at 45°
Mobil SHC 636
(15ml) 0.51 Oz.
Q'ty
1
1
1
For technical questions, please call 1-800-444-3353.
From aCCIdentaL
operatIon:
turn the power Switch of the
tool to its "OFF" position and
unplug the tool from its
electrical outlet before
assembling or making any
adjustments to the tool.
note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
assembly
1.
Before use, you must install the Saw
Blade (43).
2.
Be sure the tool is unplugged.
3.
Press in and hold the Spindle Lock
Pin (14).
4.
Using the a 6mm Hex Key, remove
the Arbor Bolt (46) and Arbor Wash-
ers (44 and 45). NOTE: The Arbor
Bolt (46) has left hand threads.
5.
Place the Saw Blade (43) on the
Arbor (25). Be sure to match the rota-
tion direction marked on the Blade
with the arrow embossed on the
Lower Blade Guard (37).
6.
Replace the Arbor Washers (44 and
45) as shown in the Assembly Dia-
gram.
7.
Replace the Arbor Bolt (46). Tighten
securely.
8.
Before operation make sure that the
Spindle Lock (14) is released. Turn
the blade by hand to check the Spin-
to preVent
SerIoUS InjUrY
Page 12
Advertisement
Table of Contents
