Hvd3605 Specifications - Teledyne Lecroy HVD3000 Series Operator's Manual

HVD3605 Specifications

For the current specifications, see the product datasheet at teledynelecroy.com. Below are
some key product specifications.
Specifications are subject to change without notice.
Guaranteed Specifications
Bandwidth (probe only)
Risetime 10-90 %
CMRR Test Limits, 23 C
Electrical Characteristics
Max. Rated Diff. Voltage
(between each input)
Max. Measurable Diff. Voltage
(before saturation)
Max. Common Mode Voltage
(from either input to ground)
Max. Input Voltage to Earth
(from either input to ground)
Max. Safe Input Voltage *
(per IEC 61010-031)
Pollution Degree *
* See "IEC/EN 61010-031 Definitions" on page 33.
** CAT I per IEC IEC/EN 61010-031/A1:2008.
"O" (No Rated Measurement Category) per IEC/EN 61010-031:2015.
Vertical Sensitivity
300 mV/Div to 2000 V/Div.
HVD3605
100 MHz
4.3 ns
80 dB @ 50 Hz
60 dB @ 10 kHz
60 dB @ 1 MHz (200x)
46 dB @ 1 MHz (2000x)
7000 V (DC + Peak AC)
7600 V (DC + Peak AC)
± 7600 V (DC + Peak AC)
6000 Vrms
± 7600 Vpk
± 8485 V (DC + Peak AC) CAT I **
6000 Vrms CAT I **
1000 Vrms CAT III
1500 Vdc CAT III
2
HVD3605 Probe
17