Voltage Derating For Hvd3000 Accessories - Teledyne Lecroy HVD3000 Series Operator's Manual

High-voltage differential probes
Hide thumbs Also See for HVD3000 Series:
Table of Contents

Advertisement

HVD3000 Series High-Voltage Differential Probes Operator's Manual

Voltage Derating for HVD3000 Accessories

Accessory
Spade Terminals
Safety Alligator Clips
Plunger Alligator Clips
Plunger Pincer Clips
Plunger Hook Clips
6kV Alligator Clips
* See "IEC/EN 61010-031 Definitions" on page 33.
** CAT I per IEC IEC/EN 61010-031/A1:2008.
"O" (No Rated Measurement Category) per IEC/EN 61010-031:2015.
CAUTION. The operating altitude of the probe is derated to 2000 m (6560 ft) when
used with the accessories above.
WARNING. Each accessory has a different measurement (overvoltage) category
(CAT) rating. The voltage and CAT rating of the probe are derated to the values in the
table above when used with the corresponding accessory.
WARNING. The HVD3206 and HVD3605 probes may be used with the HVD310x
accessories. However, the voltage and CAT rating of the probe are derated to the
values in the table above when used with the corresponding accessory.
WARNING. To avoid risk of electric shock or fire, do not exceed either the voltage
rating or category rating. Keep your fingers behind the finger guard of the probe.
Keep the probe body and output cable away from the circuits being measured. Use
only the specified accessories.
4
Part Number
PK-HVA-05
PK-HVA-01
PK-HVA-04
PK-HVA-02
PK-HVA-03
PK-HVA-06
Derated Max. Input Voltage for
Combined Probe and
Accessory (from either input to
ground) *
1000 V CAT III
1000 V CAT III
1000 V CAT III
1000 V CAT II
1000 V CAT II
6000 V CAT I **
1000 Vrms CAT III
1500 Vdc CAT III

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvd3102Hvd3106Hvd3106-6m

Table of Contents