Accu-Chek Compact Plus Manual page 2

Easy everyday testing
PRESS
to prime
1
PRESS
to prick
2
PRESS
to eject lancet
3
SAFETY ADVICE: The Accu-Chek Softclix
Plus finger pricker is intended for patient
self monitoring by an individual person only.
It must not be used to collect blood from more
than one person as it does not incorporate
any features to guard against cross-infection.
*Finger pricks are less painful if a new lancet is used for each test.
ACCU-CHEK And SOFTCLIX are trademarks of Roche.
© 2009 Roche diagnostics Limited.
Roche diagnostics Limited. Charles Avenue, Burgess Hill, RH15 9RY
Company Registration no. 571546
www.accu-chek.co.uk www.accu-chek.ie
Press the plunger at
the top end of the
finger pricker all the
way down. The plunger
returns about a third
of the way. The finger
pricker is now primed.
Place the finger pricker
against the chosen test
site, press the plunger
down again until it clicks
to obtain a sample. *
Remove the end cap
from the finger pricker.
Press the plunger to
eject the used lancet.
To load/eject lancet
1
2
3
4
5
Remove the end
cap from the
finger pricker.
Press the plunger to
eject the used lancet.
Slide the new lancet in
the lancet holder and
push it in until it clicks.
Remove the protective
cap from the lancet
with a twisting
motion.
Press the end cap back
on to the finger pricker.
The cap snaps into
place with a click.
Twist end cap to adjust
depth setting of the
finger pricker.