Meaning Of The Diagnostic Values - Siemens SIPART PS2 6DR50xx Manual

No. Abbre- Meaning
viation
21 P100 Potentiometer value upper stop (100%)
22 IMPUP Pulse length up (Impulse Length Up)
23 IMPDN Pulse length down (Impulse Length Down)
24 DBUP Dead zone up (Dead Band Up)
25 DBDN Dead zone down (Dead Band Down)
26 SSUP Short step zone up (Short Step Zone Up)
27 SSDN Short step zone down (Short Step Zone Down)
28 TEMP Current temperature
29 TMIN Minimumtemperature ("min/max pointer")
30 TMAX Maximumtemperature ("min/max pointer")
31 T1 Number of operating hours in temperature range 1
32 T2 Number of operating hours in temperature range 2
33 T3 Number of operating hours in temperature range 3
34 T4 Number of operating hours in temperature range 4
35 T5 Number of operating hours in temperature range 5
36 T6 Number of operating hours in temperature range 6
37 T7 Number of operating hours in temperature range 7
38 T8 Number of operating hours in temperature range 8
39 T9 Number of operating hours in temperature range 9
40 VENT1 Number of switching operations pilotvallve 1
41 VENT2 Number of switching operations pilotvallve 2
42 STORE Save current values as "last maintenance"
(press increment button for 5s) (Store)
43 PRUP Prediction up
44 PRDN Prediction down
45 WT00 Number of operating hours in actuating range WT00
46 WT05 Number of operating hours in actuating range WT05
47 WT10 Number of operating hours in actuating range WT10
48 WT30 Number of operating hours in actuating range WT30
49 WT50 Number of operating hours in actuating range WT50
50 WT70 Number of operating hours in actuating range WT70
51 WT90 Number of operating hours in actuating range WT90
52 WT95 Number of operating hours in actuating range WT95
53 mA Setpoint current
Table 4-1 Overview of diagnosis values
4.5.2 Meaning of the diagnosis values
1 STRKS
2 CHDIR
SIPART PS2 Manual
A5E00074631--06
Number of strokes
During operation, the actuator movements are added up and can be
read off here as the number of strokes. Unit: 100% strokes, i.e. the
path between 0 and 100 % and back. The value is written into a
non-volatile memory every 15 minutes. It can be set to zero with the
increment button .
Number of changes of direction
Operation
Values than Unit
can be
indicated
0.0 to 100.0 %
2 to 160 ms
2 to 160 ms
0.1 to 10.0 %
0.1 to 10.0 %
0.1 to 100.0 %
0.1 to 100.0 %
--40 to 85
_C
--40 to 85
_C
--40 to 85
_C
0 to 4.29E9 hours
0 to 4.29E9 hours
0 to 4.29E9 hours
0 to 4.29E9 hours
0 to 4.29E9 hours
0 to 4.29E9 hours
0 to 4.29E9 hours
0 to 4.29E9 hours
0 to 4.29E9 hours
0 to 4.29E9 --
0 to 4.29E9 --
-- --
1 to 40 --
1 to 40 --
0 to 4.29E9 hours
0 to 4.29E9 hours
0 to 4.29E9 hours
0 to 4.29E9 hours
0 to 4.29E9 hours
0 to 4.29E9 hours
0 to 4.29E9 hours
0 to 4.29E9 hours
0.0 to 20.0 mA
Reset
possible
x
x
x
x
x
x
x
x
123