Rear Panel
The following figure shows the ports, buttons, antennas, and connector on the rear panel of
the extender.
Figure 3. Rear panel
The antennas are preinstalled. In the unlikely situation that an antenna is loose, you must
tighten it. (A loose antenna could affect the performance of the extender.)
To tighten an antenna:
1.
Straighten the antenna.
2.
Turn the antenna clockwise until tightened.
After you tighten the antenna, you can change its position.
AC1200 WiFi Range Extender
Two preinstalled 5dBi antennas
WPS
On/Off
button
button
Ethernet LAN ports
Get to Know Your Extender
Power
connector
9
Reset
button