Access A Usb Storage Device Attached To The Extender - NETGEAR EX6200v2 User Manual

To access your USB device from a Mac:

1. Insert your USB storage drive into the USB 3.0 port on the front of the extender.
The USB LED
2. If your USB device includes a power supply, connect it.
You must use the power supply when you connect the USB device to the extender.
When you connect the USB device to the extender USB port, it might take up to two
minutes before it is ready for sharing. By default, the USB device is available to all
computers on your local area network (LAN).
3. On a Mac that is connected to the network, launch Finder and select Go > Connect to
Server.
4. In the Server Address field, enter smb://readyshare.
5. When prompted, select the Guest radio button.
6. Click the Connect button.
A window automatically opens and displays the files and folders on the device.

Access a USB Storage Device Attached to the Extender

ReadySHARE lets you access and share a USB drive connected to the extender USB port.
(If your USB drive uses special drivers, it is not compatible.)
To connect a USB drive:

1. Insert your USB storage drive into the USB 3.0 port on the front of the extender.
The USB LED
2. If your USB device includes a power supply, connect it.
You must use the power supply when you connect the USB device to the extender.
When you connect the USB drive to the extender USB port, it might take up to two
minutes before it is ready for sharing. By default, the USB drive is available to all
computers on your local area network (LAN).
To access the USB drive from a Mac:

1. Select Go > Connect to Server.
2. In the Server Address field, type smb://readyshare as the server address.
3. Click the Connect button.
4. When prompted to enter your name and password, select the Guest radio button.
5. Click the Connect button.
To access the USB drive from a Windows computer:

1. Select Start > Run.
AC1200 WiFi Range Extender
lights.
lights.
Share a USB Storage Device
54