Log In And Reset The Extender To Factory Settings - NETGEAR EX6200v2 User Manual

Log In and Reset the Extender to Factory Settings

CAUTION:
This process erases any settings that you configured in the extender.
To log in to the extender and reset the extender's to factory settings:

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Settings > Other.
CAUTION:
After you click the RESET button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting.
6. Click the RESET button.
A confirmation pop-up window opens.
7. Confirm your decision.
The extender returns to its factory settings and restarts. This process takes about one
minute.
AC1200 WiFi Range Extender
Maintain and Monitor the Extender
48