Use Wps With The Pin Method - NETGEAR EX6200v2 User Manual

7. Click the WIFI PROTECTED SETUP (WPS) button.
Both Link Rate LEDs
minutes.
For two minutes, the extender attempts to add the WiFi-enabled computer or mobile
device to its WiFi network.
8. Within two minutes, go to the WiFi-enabled computer or mobile device and press or click
its WPS button.
9. To verify that the WiFi-enabled computer or mobile device is connected to the extender's
WiFi network, select Settings > Connected Devices.
The computer or device displays onscreen.

Use WPS With the PIN Method

To use the PIN method to connect to the extender's WiFi network, you must know the PIN of
the WiFi-enabled computer or mobile device that you are trying to connect.
To use a WPS PIN to connect to the extender WiFi network:

1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Settings > Do More > Connect Devices (WPS).
The Connect Devices (WPS) page displays.
6. Select the PIN Number radio button.
7. Type the PIN of the WiFi-enabled computer or mobile device in the field.
8. Click the NEXT button.
For four minutes, the extender attempts to find the computer or device.
AC1200 WiFi Range Extender
and the Device to Extender LED
Extender Network Settings
35
blink green for two