Table of Contents
Advertisement
Quick Links
24 VOL
24 VOL T T T T T , 1/2 INCH
24 VOL
24 VOL
24 VOL
HAMMER DRILL KIT
HAMMER DRILL KIT
HAMMER DRILL KIT
HAMMER DRILL KIT
HAMMER DRILL KIT
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright © 2001 by Harbor Freight Tools
this manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
, 1/2 INCH
, 1/2 INCH
, 1/2 INCH
, 1/2 INCH
45790
®
. All rights reserved. No portion of
®
Advertisement
Table of Contents
Related Manuals for Chicago Electric 45790
Summary of Contents for Chicago Electric 45790
- Page 1 , 1/2 INCH HAMMER DRILL KIT HAMMER DRILL KIT HAMMER DRILL KIT HAMMER DRILL KIT HAMMER DRILL KIT 45790 ASSEMBLY AND OPERATING INSTRUCTIONS ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com ® Copyright © 2001 by Harbor Freight Tools .
-
Page 2: Specifications
Always lock up tools and keep out of reach of children. Do not force tool. It will do the job better and more safely at the rate for which it was intended. Do not use inappropriate attachments in an attempt to exceed the tool capacity. SKU 45790 Page 2... - Page 3 16. Caution: some woods contain perservatives such as copper chromium arsenate (CCA) which can be toxic. When cutting these materials extra care should be taken to avoid inhalation and minimize skin contact. Note: Performance of this tool may vary depending on the battery charge level. SKU 45790 Page 3...
-
Page 4: Battery Precautions
The Battery (25) does not come charged from the factory. Charge before using. Refer to top photos on next page. Slide the Battery (25) into the Battery Charger (31). The battery can only insert one way using the guide tabs. SKU 45790 Page 4... -
Page 5: Operation
Hold the Chuck Sleeve firmly while turning the Chuck (29) counterclockwise until the opening is large enough to accept the drill bit or screw driver bit. Insert bit and turn Chuck clockwise until it is locked on the bit. Reverse procedures to remove a bit. SKU 45790 Page 5... - Page 6 Left position : removing fasteners or freeing bits (counterclockwise). Set the two-position Speed Switch (16) for the desired speed. Position 1 for fast (0 ~ 1500 RPM); Position 2 for slow (0 ~ 450 RPM) Set the Torque Selector (15) to the desired position. SKU 45790 Page 6...
-
Page 7: Maintenance
This will ensure a full recharge. Recharge battery monthly when not in use to maintain battery life. Using a rag and light oil, wipe drill bits and other steel parts to keep them from rusting. SKU 45790 Page 7... -
Page 8: Parts List
Chuck Screw * Battery Charger * 5mm x .80mm pitch x 20mm long, left hand, countersunk head NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 45790 Page 8 REV 10/04... -
Page 9: Assembly Drawing
TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 45790 Page 9...