Download Print this page

Chicago Electric 47944 Assembly & Operating Instructions

14” electric grass trimmer

Advertisement

Quick Links

14" ELECTRIC
GRASS TRIMMER
47944
ASSEMBLY & OPERATING INSTRUCTIONS
®

Advertisement

loading

Summary of Contents for Chicago Electric 47944

  • Page 1 14” ELECTRIC GRASS TRIMMER 47944 ASSEMBLY & OPERATING INSTRUCTIONS ®...
  • Page 2 Keep the manual and invoice in a safe and dry place for future reference. Technical Specifications Product Name: Electric Grass Trimmer-14" Product Number: 47944 Motor: 3.5 Amps, 120 Volts, Single Phase 60 HZ, 9000 RPMS, Double Insulated Line Capacity: Up to 36 Feet...
  • Page 3 22. Make certain that the Guard is always between you and the Nylon Line. 23. Never stop the Nylon Line with your hands. Always let it come to a complete stop before handling or doing any maintenance. #47944 Page 3...
  • Page 4: Voltage Warning

    Snap the Guard (#6) into place at the base of the Electric Grass Trimmer. Line up the two (2) prongs in the Motor Housing (#7) with the two holes in the Guard (#6). The Guard will snap into place and sit flush with the Motor Housing (#7)-see Figure 1 on following page. #47944 Page 4...
  • Page 5 Slide Spool (#4) off of the Spring (#3). Remove any Nylon Line (#5) remaining on the Spool (#4)-see Figure 3. Step 3) Anchor one end of the new Nylon Line (#5) to Spool (#4). Wrap the Nylon Line (#5) around the Spool (#4). #47944 Page 5...
  • Page 6 Tilt the Head/Motor Housing (#7) to the desired angle by pushing in on the Head Adjuster Button (#8). The Head will swivel up and down to the position for best trimming-see Figure 1. Step 2) Release Head Adjuster Button (#8) once Head is at the ideal position. #47944 Page 6...
  • Page 7 Never bring legs, arms, fingers or body near or into contact with the Nylon Line (#5) while the Trimmer is running. The Electric Grass Trimmer cuts with excessive force and severe injury may result Always keep clear of the blade. #47944 Page 7...
  • Page 8: Please Read The Following Carefully

    ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Parts Diagram Note: #12 Screws are used when attaching the Wheel Attachment (not shown) Wheel Attachment (#1) and Screws (#12) not shown-see Figure #2. 2, 3, 4, 5, 20, 21 (see Figure 3) #47944 Page 8...