Teledyne Lecroy HVD3000 Operator's Manual page 7

HVD3000 / HVD3000A High-Voltage Differential Probes
Keep fingers behind the finger guard of the probe accessories.
Do not remove the probe's casing. Touching exposed connections may result in electric
shock or burn.
Use only as specified. The probe is intended to be used only with compatible Teledyne
LeCroy instruments. Use of the probe and/or the equipment it is connected to in a manner
other than specified may impair the protection mechanisms.
Do not bend cables excessively.
Use only within the operational environment listed. Do not use in wet or explosive
atmospheres.
Keep product surfaces clean and dry.
Do not operate with suspected failures. Before each use, inspect the probe and accessories
for any damage such as tears or other defects in the probe body, cable jacket, accessories,
etc. If any part is damaged, cease operation immediately and sequester the probe from
inadvertent use.
Operating Environment
Temperature, Operating
Temperature, Non-operating
Relative Humidity, Operating
Relative Humidity, Non-operating
Altitude
Usage
4
1.800.561.8187
CAUTION. To prevent damage to the equipment:
www.
0 C to 50 C
40 C to 70 C
5% to 80% RH (Non-Condensing)
45% RH above 30 C
5% to 95% RH (Non-Condensing)
75% RH above 30 C
45% RH above 40 C
3000 m (9842 ft.) max.
Derated to 2000 m (6561 ft.)
when used with clip accessories
Indoors
.com
information@itm.com