Install The Extender To Boost Your Wifi Range; Set Up The Extender Hardware; Use Wps To Connect The Extender To Your Wifi Router - NETGEAR EX7000 User Manual

Install the Extender to Boost Your WiFi Range

The most common way to use the extender is to boost the range of your existing WiFi
network. You can also use the extender as a WiFi access point and create a new WiFi
hotspot by using a wired Ethernet connection. For information about access point installation,
see Install the Extender as an Access Point

Set Up the Extender Hardware

To set up the extender hardware:

1. Attach the stand or the rubber feet.
For more information, see
page 10.
2. Attach the antennas.
For more information, see
3. Turn on your extender.
Place the extender close to your WiFi router. Plug the extender into an electrical outlet.
Press the Power button if necessary.
The NETGEAR LED lights white and the Link Rate LEDs and the Device to Extender LED
light amber and then turn off.

Use WPS to Connect the Extender to Your WiFi Router

You can use WiFi Protected Setup (WPS) to connect the extender to your WiFi router without
typing your existing router's WiFi network name (SSID) or WiFi password. If you do not want
to use WPS, see Use a Web Browser to Connect the Extender to Your WiFi Router
page 16.
To use WPS to connect the extender to your WiFi router:

1. Make sure that the extender is powered on.
2. Press the WPS button on the extender.
Both Link Rate LEDs
minutes.
3. Within two minutes, press the WPS button on your WiFi router.
4. If your WiFi router supports the 5 GHz band, repeat Steps 1 and 2 to connect the extender
to the 5 GHz band.
5. Unplug the extender and move it to a new location that is about halfway between your router
and the area with a poor router WiFi signal.
The location that you choose must be within the range of your existing WiFi router
network.
AC1900 Nighthawk WiF Mesh Extender
on page 18.
Attach the Stand on page 9 or
Attach the Antennas
and the Device to Extender LED
Get Started
14
Attach the Rubber Feet
on page 10.
on
on
blink green for two