NETGEAR Unite Express 2 User Manual

AT&T Eco Rating 2.0 only applies to the NETGEAR
Mobile Hotspot, model AC797. For limited factors
evaluated visit att.com/EcoSpace. Wireless
Emergency Alerts is a registered Trademark and
Service Mark of CTIA.
NETGEAR and the NETGEAR Logo are trademarks
of NETGEAR, Inc. LTE is a trademark of ETSI. 4G
LTE not avail. everywhere. Contains <battery type>
battery - recycle or dispose of properly. 2018 AT&T
Intellectual Property. All rights reserved. AT&T, the
AT&T logo and all other AT&T marks contained herein
are trademarks of AT&T Intellectual Property. All
other marks are the property of their respective
owners.
Printed in USA
Set Up Your Mobile Hotspot
1 Insert the battery.
2 Install the back cover.
The battery is precharged. When you need
to recharge it, connect the USB cable to the
mobile hotspot and then plug into:
• A wall socket, using the wall charger (fastest
option)
• The USB port on your laptop
Note: The mobile hotspot comes with a preinstalled SIM card.
Activate Your Account
Online
1 On a computer that is connected to the
Internet, go to att.com/gophone in the
device's browser.
2 Under Activate Account select mobile
hotspot and follow the prompts to create
an account.
By Phone
• Call 866-707-5550 to activate your account.
Your Account Passcode
• Your mobile hotspot will be assigned a
wireless phone number.
• The last four digits of your wireless
number will be your account passcode.
• You will need this passcode to manage your
account.
• For security, we recommend that you
change this to a secure passcode not
related to the wireless number assigned to
this device.
Note: To begin using service, please be sure to add sufficient
money to cover the plan you selected. If you do not add money
to your account within 26 days of activation, your account will
be canceled.
DRAFT
201-24043-01
FPO
Network indicator
Signal
strength
Number of
connected
FPO
devices
Messages
Press the Navigation button
through the screens.

Connect to the Internet

Turn on your mobile hotspot
1 Press and hold the Power button for 2
seconds.
Note: The screen displays the hotspot's Wi-Fi network
name and password.
On your laptop or other wireless device
2 Open your Wi-Fi/network connection
manager.
3 Find your mobile hotspot's Wi-Fi network
name (ATT-WIFI-XXXX) and connect.
4 Enter your mobile hotspot's Wi-Fi password.
5 Launch your Internet browser.
Note: The screen goes dark to save power. Press and release
the Power button to wake the screen.
FPO
Alert indicator
Battery
Wi-Fi network
name
and password
to scroll