Ricoh Rh 100 Quick Manual

Hide thumbs Also See for Rh 100:

Download this manual

Quick Guide

This guide describes the basic printing procedures using the

printer and this machine. In the next pages, the procedures

for each step and particular cautions are explained.

For safe and correct use, be sure to read Safety Information

before using the machine.

Guide to Components of the Finisher

Front Cover

Mode Switching

Lever

Control Panel

Mode indicator

• Light: Press the [Preheat] key to start preheating

• Flashing: Preheating under way

• Off: Preheating completed

Tray

Time/temperature indicator

[Temperature] key

Finisher

(This machine Rh 100)

[Preheat] key

[Time] key

[Stop/Unlock] key

DSA121

Printer

(Ri 100)

[Power] key

DYX362

Table of Contents

Page 1: Quick Guide
DSA121 Guide to Components of the Finisher Tray Printer (Ri 100) Front Cover Mode Switching Lever Finisher (This machine Rh 100) Control Panel Mode indicator Time/temperature indicator [Temperature] key [Preheat] key [Power] key [Time] key [Stop/Unlock] key • Light: Press the [Preheat] key to start preheating •...
Page 2: Standard Mode
Basic Usage of the Finisher CAUTION: • A parent or guardian must be present if infants, children, or people who need assistance use the ma- chine, and they should be very careful when using it. Otherwise, injury or burns may result. The finisher has “Standard mode”, “Professional mode”, and “Professional 2 mode”.
Page 3: Operating Procedure
How to Switch Modes Unlock Cover ◆ ◆ Press the [Temperature] key and When set to standard mode, press [Time] key simultaneously for at least the [Stop/ Unlock] key for at least 1 2 seconds. second. DYX353 DYX360 The operating mode changes as fol- When set to the professional mode, lows.
Page 4 When you move the mode switching lever to the left, processing starts. An alarm sounds after pre- right, processing starts. An alarm sounds after heating is completed. preheating is completed. ➋ ➋ © 2017, 2018 Ricoh Co., Ltd. EN GB EN US EN AU J361-6607E...