Elkay EZFSTL8*1H series Installation And Use Manual

Elkay EZFSTL8*1H series Installation And Use Manual

Versatile bi-level water coolers

Advertisement

EZFSTL8*1H, 2H
INSTALLATION AND USE MANUAL
EZTL
& LZTL
EZTL
EZTL
& LZTL
Versatile Cooler Models EZSTL8L and
LZSTL8L alternate installation
LZFSTL8*1H, 2H
Manual de instalación y uso
Manuel d'installation et utilisation
Series Versatile Bi-Level Water Coolers
& LZTL
Serie versátil bi-nivel enfriadores de agua
Série versatile refroidisseurs d'eau à deux niveaux
PAGE 1
EZFSDTL*1H
LZFSDTL*1H
Versatile Cooler Models EZSTL8L and
LZSTL8L configuration as shipped
1000003116 (Rev. B - 08/18)

Advertisement

Table of Contents
loading

Summary of Contents for Elkay EZFSTL8*1H series

  • Page 1 EZFSTL8*1H, 2H LZFSTL8*1H, 2H EZFSDTL*1H LZFSDTL*1H INSTALLATION AND USE MANUAL Manual de instalación y uso Manuel d’installation et utilisation EZTL & LZTL Series Versatile Bi-Level Water Coolers ™ ™ ™ ™ EZTL & LZTL Serie versátil bi-nivel enfriadores de agua ™...
  • Page 2 EZFSTL8*1H, 2H LZFSTL8*1H, 2H EZFSDTL*1H LZFSDTL*1H Note: Danger! Electrical shock hazard. Disconnect power before servicing unit. Nota: peligro! Peligro de descarga eléctrica. Desconecte antes de reparar la unidad l’appareil. Remarque : Danger ! Risque de choc électrique. Débrancher avant de réparer Uses HFC-134A refrigerant Usa refrigerante HFC-134A Utilise du fluide frigorigéne HFC-134A...
  • Page 3 EZFSTL8*1H, 2H LZFSTL8*1H, 2H EZFSDTL*1H LZFSDTL*1H FIG. 2 PAGE 3 1000003116 (Rev. B - 08/18)
  • Page 4 EZFSTL8*1H, 2H LZFSTL8*1H, 2H EZFSDTL*1H LZFSDTL*1H FIG. 3 1000003116 (Rev. B - 08/18) PAGE 4...
  • Page 5 EZFSTL8*1H, 2H LZFSTL8*1H, 2H EZFSDTL*1H LZFSDTL*1H Versatile Wrapper and Trim Kit Installation Instructions Left Hand Wrapper (High Side) Right Hand Wrapper 1) Remove existing wrapper (Low Side) by removing the (4) screws 1) Remove existing wrapper from bottom. by removing the (4) screws 2) Screw trim piece to wrapper from bottom.
  • Page 6 EZFSTL8*1H, 2H LZFSTL8*1H, 2H EZFSDTL*1H LZFSDTL*1H HANGER BRACKETS INSTALLATION INSTALACIÓN DE SOPORTES PARA COLGAR SUPPORTS DE CROCHET DE SUSPENSION INSTALLATION Retire el soporte fijador que se encuentra conectado a 1) Remove hanger brackets fastened to back of cooler la parte posterior del enfriador sacando un (1) tornillo. 1) Retirez le support de suspension fixé...
  • Page 7: Service Instructions

    EZFSTL8*1H, 2H LZFSTL8*1H, 2H EZFSDTL*1H LZFSDTL*1H Service Instructions Lower and Upper Shroud To access the refrigeration system and plumbing connections, remove four screws from bottom of cooler to remove the lower shroud. To remove the upper shroud for access to the pushbars, regulator, solenoid valve or other components located in the top of the unit, remove lower shroud, disconnect drain, remove four screws from tabs along lower edge of upper shroud, unplug two wires and water tube.
  • Page 8 EZFSTL8*1H, 2H LZFSTL8*1H, 2H EZFSDTL*1H LZFSDTL*1H Basin Estanque Bassin Locknut Tuerca de Fijación Écrou de Blocage BUBBLER DETAIL VANDAL RESISTANT BUBBLER DETAIL DETALLE DEL GRIFO DETALLE DEL GRIFO RESISTENTE AL VANDALISMO DESCRIPTION DU BARBOTEUR RESISTANT AU VANDALISME DETAIL DU BARBOTEUR FIG.
  • Page 9 PRINTED IN U.S.A. INFORMATIONS POUR LE SERVICE PAR NUMERO SANS FRAIS 1-800-260-6640 IMPRESO EN LOS E.E.U.U. IMPRIMÉ AUX É.-U. ELKAY MANUFACTURING COMPANY • 2222 CAMDEN COURT • OAK BROOK, IL 60523 • 630.574.8484 • www.elkay.com PAGE 9 1000003116 (Rev. B - 08/18)

Table of Contents