1. Manuals
  2. Brands
  3. Strongway Manuals
  4. Lawn and Garden Equipment
  5. 46436
  6. Owner's manual

Strongway 46436 Owner's Manual

Heavy-duty garden wagon with rails
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
HEAVY-DUTY GARDEN WAGON
WITH RAILS
OWNER'S MANUAL
WARNING:
Read carefully and understand all INSTRUCTIONS before
operating. Failure to follow the safety rules and other basic
safety precautions may result in serious personal injury.
Item #46436

Advertisement

Table of Contents
loading

Related Manuals for Strongway 46436

Summary of Contents for Strongway 46436

  • Page 1 HEAVY-DUTY GARDEN WAGON WITH RAILS OWNER’S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item #46436...

  • Page 2: Intended Use

    Thank you very much for choosing a Strongway product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it.

  • Page 3: Work Area

    SAVE THESE INSTRUCTIONS. WORK AREA • Keep the work area clean, free of clutter and well lit. Cluttered and dark work areas can cause accidents. • Keep children and bystanders away while operating the wagon. Distractions can cause you to lose control, so visitors should remain at a safe distance from the work area.
  • Page 4 ASSEMBLY 1. Slip the Strut on to the Axle Shaft in the position shown in (Figure 1). Secure the Struts and Tag Axle to the Frame with six M8×20 Hex Bolts, 8mm Flat Washers and M8 Locking Nuts. Figure 1. Tag Axle Installation Strut Tag Axle Support Tag Axle Shaft...
  • Page 5 Figure 3. Steering Axle Tie Bar Center Strut Receiver King Pin, Washer, and Cotter Pin 4. Place the 10mm Flat Washer on to the King Pin and secure it with the Cotter Pin (Figure 3). 5. Secure the Tie Bar to the Steering Axle and fasten the Axle Assembly to the Frame with four M8×20 Hex Bolts, 8mm Flat Washers and M8 Locking Nuts (Figure 3).

  • Page 6: Maintenance

    Figure 5. Tow Handle Tow Handle Receiver 8. Fix the wood Side-, Front- and Back-Panels to the Wagon Slots (Figure 6). Wood side panel Figure 6. Wood Side Rail Base Assembly WARNING: Make sure the tires are inflated to the pressure indicated on the tire sidewall. Do not over inflate: Use a hand pump only.
  • Page 7 DIAGRAM AND PARTS LIST Part # Description Qty. Part # Description Qty. Hex Bolt M8×60 Side Panel Flat Washer 8MM Rear Axle Lock Nut M8 w/Support Front Panel Cross Head Bolt M8×15 Back Panel Tie Bar 3.50-4 Wheel Sleeve Rear Axle Right Cross Head Bolt M6×10 Strut Rear Axle Left Strut...

  • Page 8: Warranty

    WARRANTY One-year limited warranty Distributed by: Northern Tool + Equipment Co., Inc. Burnsville, Minnesota 55306-6936 NorthernTool.com Made in China Page of 8...

Table of Contents