York YK Style H Operation Manual page 33

FORM 160.76-O2
issue date: 6/15/2015
Heat Recovery
Access Level Required: SERVICE
Moves to a sub screen allowing programming and
viewing of the Heat Recovery setpoints and parame-
ters. Only appears when the Heat Recovery is enabled.
Head Pressure Control
Access Level Required: SERVICE
Moves to a sub screen allowing programming and
viewing of the Head Pressure Control setpoints and pa-
rameters. Only appears when Head Pressure Control is
enabled and Heat Recovery is disabled.
JOHNSON CONTROLS
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
Heat Pump
Access Level Required: VIEW
Moves to a sub screen allowing programming and
viewing of the Heat Pump Setpoints and parameters.
Only appears when Heat Pump is enabled on the SET-
UP Screen.
2
33